Bank full Stage – Assessment Paper

Bank full stage

Bank full stage is the water depth at which a stream completely fills its channel (to the top of the banks) and begins to overflow onto its floodplain. Many researchers feel that bank full flows are the critical flows in determining character and geometry of the stream channel. Others have argued (perhaps less convincingly) that due to their relatively high magnitude and frequency, bank full flows may be responsible for accomplishing the largest amount of geomorphic work (bank erosion, sediment transport, etc.). The size of the bank full channel of a river is important because it scales the balance of reach-scale erosion and deposition with the longer-term flow regime and sediment flux. Rivers will tend to adjust towards an equilibrium condition, wherein the scale of the channel topography and the size of bed sediments are able to convey recurrent bank full-level floods.

What data would we need to collect in the field to determine the bank full discharge of a river using the Manning equation? How could we determine the Manning roughness coefficient for modern stream flow? What data would we need to collect to do this? From an environmental standpoint, why are some streams more sensitive to environmental impact than others? If you work for a consulting firm and a client asks you to evaluate the impact of real estate development on a local drainage basin, what would you look for? How would you design your study? Describe how urbanization (constructing cities with buildings, parking lots, etc.) affects the frequency of large flooding events. Explain in your own words, how a stream transport and deposits sediments.

Further Description

Make sure that you include all appropriate equations and terms. State Darcy’s law and explain the core sample method. (Hint: A drawing may be a useful way to present the variables used in Darcy’s law.)In this exercise you will analyze discharge data from the U.S. Geologic Service (USGS). Data for all USGS gages in the state of New York can be found at: a gage station by clicking on the circle and then the name of the station (in blue).From the “Available data for this site” window on the main page for the Missoula gage, go to “Field measurements.” Download “field measurements” to a tab separated file, open in Excel. These are data collected over the years at this gaging station by USGS personnel. These data provide a nice record of channel changes at this site over time.

Spend some time looking at the data and understanding what each column represents. All of the analyses below should be done in metric, so you’ll need to create some new columns with the appropriate unit conversions. Plot inside gage height versus Q, first for the data set as a whole, then for the most recent rating set (9). What you’ve plotted here is a stage-discharge rating curve, which describes the relationship between flow depth (stage) and discharge, for a specific cross-section. The discharges used to develop rating curves are developed from field measurements of cross-sectional flow area and velocity (Q=UA); then, once a rating curve has been established at a site, discharge can be determined based on measurements of depth only.

Additional Information

So when you see daily/hourly USGS discharge data, these data are based on continuous automated measurements of depth (stage). Changes in cross-sectional morphology produce changes in stage-discharge relationships, which is why stable reaches are desirable as gage locations. Your rating curve probably isn’t a straight line. Firstly would you expect it to be linear or not? Secondly explain your reasoning. Plot channel width vs time. Thirdly is any trend in channel width (i.e., narrowing or widening) evident? Further is this plot an accurate way of assessing changes in width? How would you explain the obvious outliers? Calculate the width-depth ratio for each measurement. Plot Q vs w:h. Firstly what can you infer about cross-section shape and confinement from this curve?

Attached Files


Powered by WordPress and MagTheme